General amplification issues

Sound issues

Sound

Battery & Charging

Firmware

General Troubleshooting Steps

Pairing and Connectivity

Troubleshooting

header_left_side_navigation

text-left

<div>In these cases, try experimenting with different presets and volume levels to find the best configuration for your hearing needs. For example: * Combine "softer" presets, such as Preset A or B, with higher volume levels (typically, 4 or 5). * Alternatively, try pairing "stronger" presets, such as Preset C or D, with lower volume levels (typically, 2 or 3). * Finally, keep in mind that increasing the Background Noise setting (e.g., from "Lowered" to "Standard") can also enhance the perceived amplification</div>

Some presets seem to not amplify enough, while others too much. isn't there a middle ground setting?

main_placement_1

<div>
 It’s important to understand that your brain will need some time to adjust to these new auditory experiences. Since most hearing losses occur in the high-frequency range, the initial amplification of these sounds may come across as tinny, robotic, or unnatural. Discomfort during this adjustment period is common, and it typically lasts a few days. To ease the transition, consider starting with lower volume levels and gradually increasing them as you become more comfortable. Here are some additional tips to help you acclimatize to your glasses: a. Experiment with Different Presets Different presets can provide a more comfortable sound experience. Check out this FAQ <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">What is a “Preset” and how to change it?</a>&nbsp;for instructions on how to explore your options. b. Adjust the Background Noise Setting Try lowering the background noise setting from "Standard" to "Lowered." For guidance on changing this setting, refer to this FAQ <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">What is the Background Noise configuration and how can I change it?</a>. c. Perform the Calibration guided process If you haven't performed the Calibration guided process yet or need to re-perform the Calibration guided process, this step can significantly enhance your experience. Find out more about the "Calibration" process and its benefits here: <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">What is the "Calibration" process useful for, and how to perform it?</a>. By following these tips, you can make the acclimatization process smoother and more enjoyable. Remember, it’s perfectly normal to feel some discomfort at first, but with time and patience, you’ll likely find a comfortable auditory experience that enhances your daily life. If you have any further questions or need assistance, don’t hesitate to reach out
</div>

The amplification of certain sounds feels artificial (metallic, tinny). what should i do?

main_placement_2

<div>
 Experiencing your voice as amplified is completely normal with any hearing solution. This occurs because you are now receiving amplification of all sounds around you, including your own voice. It typically takes about 30-40 minutes of continuous use in a noisy environment to start feeling more comfortable with this sensation, while full acclimatization usually occurs within just a few days. To help you adjust, consider trying the following tips: STEP 1: Adjust the "Own Voice" Configuration Ensure that the "Own Voice" setting is configured to "No." This adjustment can help reduce the amplification of your voice. For instructions on how to do this, check out this FAQ <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">What is Own Voice configuration and how can I change it?</a>. STEP 2: Perform the Calibration guided process If you haven’t performed the Calibration guided process yet, or if you need to re-perform the Calibration guided process, doing so can enhance your overall experience. Learn more about the "Calibration" process and its benefits here: <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">What is the "Calibration" process useful for, and how to perform it?</a>. STEP 3: Explore Different Presets Different sound presets may provide a more comfortable auditory experience. Feel free to experiment with these settings. For guidance on how to change presets, refer to this FAQ <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">What is a “Preset” and how to change it?</a>. Remember, it’s entirely normal to feel a bit odd about your amplified voice at first. With a little patience and these adjustments, you’ll likely find a more enjoyable auditory experience in no time. If you have any further questions or need assistance, don’t hesitate to reach out
</div>

I hear my own voice too loud. what should i do?

main_placement_3

<div>
 If you're experiencing audio issues with "Frontal" audio mode, try these steps: Step 1: Check audio mode configuration Ensure the audio mode is set to "Frontal" For help changing the mode, see: <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">How to configure audio mode</a>. Step 2: Increase the volume Sometimes raising the volume can improve sound quality. For instructions, see: <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">How to adjust eyewear volume</a>. Step 3: Try different presets Experiment with various sound presets to find one that works better for you. Learn more here: <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">How to change presets</a>. Step 4: Restart your glasses If the issue persists, trying turning them off and on again. Step 5: Factory reset the glasses If all else fails, perform a factory reset. See: <a data-show="replace" href="/en-int/c/support/troubleshooting/general-troubleshooting-steps/generic-unexpected-behavior-of-the-glasses" aria-label="link">How to reset your glasses</a>. If problems persist, please contact us.
</div>

I am using the glasses in "Frontal" audio mode, but sounds in front of me does not seem to be amplified

main_placement_4

<div>
 If you're hearing sounds in front but not behind, try these steps: 1. Adjust the audio mode Switch the audio mode from "Frontal" to "All-around" in the app to amplify sounds from all directions. For details, see: <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">How to change audio mode</a>. 2. Increase background noise setting Try raising the background noise setting (e.g., from "Lowered" to "Standard"). For help, check: <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">How to change background noise settings</a>. 3. Increase the volume Raising the volume might improve sound quality. For guidance, see: <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">How to adjust eyewear volume</a>. 4. Experiment with different presets Try different sound presets to find one that works better for you. Learn more here: <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">How to change presets</a>.
 If you need further assistance, please contact us.
</div>

I hear sounds in front of me but sounds from behind do not seem amplified. Why? What should I do?

main_placement_5

<div>
 This issue can happen for a few reasons. Here’s how to understand and fix it: Objects near the glasses Whistling sounds can occur when objects are too close to or in contact with the frame. Common scenarios include: a. Touching the frame: Adjusting or removing your glasses may cause whistling. b. Wearing a hoodie: Fabric brushing against the glasses can cause noise. c. Near a wall: Hard surfaces nearby can affect audio. d. Wind: Strong winds may trigger this whistling effect. Using Presets in quiet environments Presets C or D might cause whistles in quiet settings. Switch to preset A or B via the App. More details here: <a data-show="replace" href="/en-int/c/support/faq/nuance-audio-app/hearing-configuration" aria-label="link">Presets</a>. Using in small spaces Confined spaces (e.g., inside a car) can affect sound. Try moving to reduce the whistling. Final tips a. Lowering the volume can help minimize whistling. b. If whistling occurs when nothing is near or in contact with the glasses, try turning them off and on again. For more help, contact customer support.
</div>

The glasses make a whistling sound. What should I do?

main_placement_6

Shop <PRODUCT_NAME> accessories in <COLOR>. Discover more on Grand Vision Online.

Shop <PRODUCT_NAME> electronics in <COLOR>. Discover more on Grand Vision Store Online.

Shop <PRODUCT_NAME> eyeglasses in <COLOR>. Discover more on Grand Vision Store Online.

Shop <PRODUCT_NAME> sunglasses in <COLOR>. Discover more on Grand Vision Store Online.

<PRODUCT_NAME> Accessories in <COLOR> | Nuance

<PRODUCT_NAME> Electronics in <COLOR> | Nuance

<PRODUCT_NAME> Eyeglasses in <COLOR> | Nuance

<PRODUCT_NAME> Sunglasses in <COLOR> | Nuance

Acquista gli occhiali da vista <PRODUCT_NAME> in <COLOR>. Scopri di piÃ¹ su Grand Vision Store Online.

Acquista gli occhiali da sole <PRODUCT_NAME> in <COLOR>. Scopri di piÃ¹ su Grand Vision Store Online.